NAME

Question types


Start with


Question limit

of 39 available terms
(4 partial duplicates found)

Print test

35 Matching questions

  1. Urethane Methacrylate
  2. UV bonding gel
  3. UV gel polish
  4. Hard UV gels
  5. soft UV gel
  6. Pigmented UV gels
  7. Thickness
  8. One-color method
  9. Unit Wattage
  10. hard UV gel
  11. UV self-leveling gels
  12. Inhibition Layer
  13. UV lamp
  14. photoinitiator
  15. 28-watt unit
  16. UV building gels
  17. Inhibition
  18. Medium Abrasive
  19. UV gel
  20. UV light unit
  21. Soft UV gels
  22. dry
  23. reduce the strength of the cured gel
  24. easy
  25. UV gloss gel
  26. Photoinitiator
  27. Opacity
  28. 9-watt
  29. have clients insert their hands into the UV lamp slowly
  30. cure
  31. concentration
  32. either UV building gels or UV self-leveling gels
  33. Oligomer
  34. Squeeze Tubes
  35. two-color method
  1. a Type of UV gel that cannot be removed with a solvent.
  2. b Type of UV gel that is a soakable gel
  3. c Product designed specifically to improve adhesion of UV gels to the natural nail plate.
  4. d "UV light"; specialized electronic device that powers and controls UV lamps to cure UV gel nail enhancements
  5. e Different UV lamps produce greatly differing amounts of UV light. This is referred to as the UV lamp intensity or _______
  6. f UV gels can be _____ to maintain
  7. g "UV light bulb"; special bulb that emits UV light to cure UV gel nail enhancements
  8. h The measure of how much electricity the lamp consumes.
  9. i UV gel polish does not _____.
  10. j Pigmented UV gels may be _________.
  11. k A very thin-viscosity UV gel that is usually pigmented and packaged in a pot or a polish bottle and used as an alternative to traditional nail lacquers.
  12. l Type of nail enhancement product that hardens when exposed to a UV light
  13. m Gels that are thinner in consistency than building gels, allowing them to settle and level during application
  14. n The tacky surface left on the nail after a UV gel has cured.
  15. o Short chain of monomer liquids that is often thick, sticky, and gel-like and that is not long enough to be considered a polymer
  16. p A method whereby two colors of resin are used to overlay the nail.
  17. q When one color of gel, usually clear, is applied over the entire surface of the nail.
  18. r A main ingredient used to create UV gel nail enhancements
  19. s "sealing gel, finishing gel, or shine gel"; these gels are used over the finished UV gel application to create a high shine.
  20. t A ______ is a chemical in UV gel resins that initiates the polymerization reaction
  21. u What is the most common UV lamp on the market?
  22. v "traditional UV gels"; gels that cannot be removed with a solvent and must be filed off the natural nail.
  23. w Any thick-viscosity adhesive resin that is used to build an arch and curve to the fingernail
  24. x To help control the heat generated from the chemical reaction that occurs when UV gels cure, it is recommended that you _________.
  25. y A ______ is recommended to check and refine the nail contour for UV gel nails.
  26. z The amount of colored pigment concentration in a gel, making it more or less difficult to see through.
  27. aa To harden
  28. ab The tacky surface left on the nail after a UV gel has cured is called the ______ layer.
  29. ac UV gel products are usually packaged in opaque pots or _____.
  30. ad A chemical that initiates the polymerization reaction.
  31. ae Any building or self-leveling gel that includes color pigment.
  32. af "soakable gels"; these gels are removed by soaking in acetone.
  33. ag Introducing air into the UV gel as you apply it to the fingernail will _______.
  34. ah If a UV light unit has four lamps in it, and each lamp is 7-watts, it is known as a _______ light unit.
  35. ai Viscosity is the measurement of the _____ of a liquid.