Question types

Start with

Question limit

of 125 available terms

Print test

105 Matching questions

  1. The __________ is the propellant used in most firearms. It produces a large volume of gas when ignited.
  2. On a semiautomatic rifle/carbine, the __________ expels the shell from the ejection port. (This is an internal part of the bolt.)
  3. What are the main parts of the magazine (in a semiautomatic pistol)?
  4. On a shotgun, the __________ holds the trigger group and bolt assembly.
  5. As defined in Section 775.082 or Section 775.083, F.S., if a person fails to properly store a firearm and as a result thereof a minor gains access to the firearm, without the lawful permission of the minor's parent or the person having charge of the minor, and possesses or exhibits it, without the supervision required by law: in a public place or in a rude, careless, angry or threatening manner in violation of s. 790.10, F.S., the person can be charged with a __________.
  6. The __________ (on a semiautomatic pistol) releases the magazine from the frame (magazine well).
  7. If a minor obtains a firearm as a result of unlawful entry by any person,
  8. On a semiautomatic rifle/carbine, the __________ permits removal of the magazine from the firearm.
  9. When operating a semiautomatic pistol, __________ is unseating the breech end of the barrel from the slide.
  10. A part of the shotgun's stock is the __________. This is the "small of the stock", just behind the receiver. The shooter uses this part and his or her shooting hand for control when firing or carrying it.
  11. Select ALL of the TRUE statements that apply to safety rules while on the firing range.
  12. The __________ is the part of a revolver that turns the cylinder as the gun is cocked, thus aligning a cartridge with the hammer or firing pin (internal part).
  13. A(n) __________ is one-half to three-quarters of this lead bullet is jacketed with copper. The exposed lead on the flat nose allows for expansion upon impact. Usually of high velocity, this bullet is designed for antipersonnel. The round easily penetrates interior walls and solid doors.
  14. When operating a semiautomatic pistol, __________ is returning the firing mechanism to the fire position.
  15. When a pistol is double action only, the weapon's pull __________ the same each time.
  16. When a pistol is double action only, the hammer __________ stays cocked.
  17. On a semiautomatic rifle/carbine, the __________ is the opening that permits the shell to exit the weapon. (This is an internal part.)
  18. When studying firearms, the __________ hand is the hand that assists the shooting hand.
  19. You can safely use .38 caliber ammunition
  20. You should never leave a
  21. The __________ (on a revolver) is located on the rear of the frame. It can be adjustable or fixed.
  22. The __________ (on a revolver) is the part of the frame that houses the rear sight, positioned over the cylinder.
  23. You should clean your firearm
  24. The __________ (on a semiautomatic pistol) allows the trigger to move when pressed.
  25. You should never point a firearm at anyone or anything that
  26. The __________ (of a shotgun) refers to spherical pellets of various sizes, usually made of lead.
  27. When operating a semiautomatic pistol, __________ is "pushing" the spent cartridge out of the ejection port.
  28. When handing a shotgun to another person in the __________ stance, hold the stock with your shooting hand and the fore-end with your support hand. Then, point the barrel in a safe direction. Last, put the safety in the on position, the fore-end to the rear, and put the ejection port open while facing the person receiving the weapon.
  29. The Glock action is sometimes referred to as "striker fire action." The Federal Bureau of Alcohol, Tobacco, and Firearms (BATF) classifies the Glock as a __________ pistol.
  30. In a __________ pistol, the first round fires double action. (The trigger being pulled to the rear manually cocks the hammer and releases it.) The second and subsequent rounds fire single action as the hammer remains cocked each time the slide cycles.
  31. When operating a semiautomatic pistol, __________ is moving the round from the magazine to the chamber by releasing the slide, picking up the round from the magazine and seating the round into the chamber.
  32. Officers are responsible for making sure their weapons are secure
  33. On a shotgun, the __________ is a mechanical device that, when activated, releases the slide.
  34. A part of the shotgun's stock is the __________. This is a butt plate, usually rubber, that reduces the effect of the shotgun's recoil or "kick".
  35. Each time you pick up, put down, or hand a firearm to another,
  36. An officer should
  37. When a pistol is in __________, every round fires double action with the hammer at rest against the rear of the slide. Every time the trigger is pulled to the rear, it manually cocks and releases the hammer to fire the pistol. As the slide cycles and goes forward, the hammer safety follows, coming to rest against the slide's rear.
  38. The __________ is the portion of the ammunition cartridge that becomes a projectile in flight.
  39. A part of the shotgun's stock is the __________. This is the bottom part of the butt.
  40. The __________ is the edge on the base of an ammunition cartridge case that stops the process of the case into the chamber.
  41. On a semiautomatic rifle/carbine, the __________ blocks the hammer from striking the firing pin, preventing firing. It is located on the left side of the weapon.
  42. The __________ (on a semiautomatic pistol) is a device that locks the slide in the open position.
  43. Before holstering a double/single pistol, the weapon must be __________.
  44. On a semiautomatic rifle/carbine, the __________ is a button assuring that the bolt is locked.
  45. A __________ mechanism (of a pistol) releases the hammer or striker. Once the first round is fired the automatic movement of the slide resets the mechanism for each subsequent shot.
  46. You can not use .357 ammunition
  47. The __________ (on a semiautomatic pistol) is part of the frame that protects the trigger.
  48. After firing is complete (for a double/single pistol), the hammer __________ cocked.
  49. When depressed, the __________ (on a revolver) causes the extractor to push the cartridge from the cylinder.
  50. The __________ is a small, metal cup containing the detonating mixture used to ignite the propellant or powder charge.
  51. You should always treat every firearm as if
  52. When operating a revolver, __________ is pushing or pulling the cylinder release latch; this rotates the cylinder out of the frame. Pushing the extractor rod ejects all cartridges.
  53. A part of the shotgun's stock is the __________. This is the stock's top edge where the shooter's cheek rests.
  54. The __________ (on a semiautomatic pistol) houses the firing pen, safety, drop safety, sights, and extractor.
  55. When operating a shotgun, __________ is placing live rounds in the magazine tube or open ejection port.
  56. When operating a semiautomatic pistol, __________ is when the breech end of the barrel locks into the slide
  57. __________ is a measurement of shotgun bores derived from the number of bore-sized balls of lead per pound.
  58. Section __________, F.S., says that a person who stores or leaves, on a premise under his or her control, a loaded firearm, and who knows or reasonably should know that a minor is likely to gain access to the firearm without the lawful permission of the minor's parent or the person having charge of the minor, or without the supervision required by law, shall keep the firearm in a securely locked box or container or in a location which a reasonable person would believe to be secure or shall secure it with a trigger lock except when the person is carrying the firearm on his or her body or within such close proximity thereto that he or she can retrieve and use it as easily and quickly as if he or she carried it on his or her body.
  59. A part of the shotgun's stock is the __________. This is the rear area of the stock that the shooter mounts against the shoulder for firing. It is normally covered with a metal or plastic butt plate or a recoil pad.
  60. A(n) __________ is a round designed for training or noise. The casing's cardboard material becomes a projectile when fired. The projectile cannot penetrate drywall or hollow core doors. However, it can penetrate soft body tissue. When fired at close range, it can cause serious injury or death. Do not discharge in the direction of others. Use extreme caution.
  61. You should fully inspect your firearm once a __________.
  62. As you draw the trigger (of a semiautomatic pistol) fully to the rear in double action mode, the hammer moves back and then releases to strike the firing pin. Upon firing, the slide moves back, extracting and ejecting the spent cartridge case and pushing the hammer to the fully cocked position. As the slide moves to the rear, the recoil spring compresses. When all the energy has been used, the spring decompresses, pushing the slide forward. Then the slide returns forward, feeding the next cartridge from the magazine to the barrel chamber. The hammer remains cocked and the trigger is in the rear position, so subsequent shots fire in single-action mode. This sequence repeats until the last round fires. Then the magazine follower exerts upward pressure on the slide stop, causing it to engage and hold the slide in the open position. (This example describes a __________ pistol.)
  63. The __________ (on a semiautomatic pistol) is a device that allows quick and simple field stripping of the pistol.
  64. When the trigger is squeezed, the cylinder unlocks and rotates, placing a live cartridge in line with the firing pin. When the hammer falls, the hammer nose or firing pin strikes the primer and ignites the powder charge. The burning powder creates a gas, and pressure builds from the gas. This pressure sends the projectile (bullet) down and out of the barrel. The trigger releases forward, resetting the mechanism. This is how a __________ works.
  65. Negligence
  66. On a semiautomatic pistol, the __________ holds the magazine spring and follower in the magazine. You can remove it to clean inside the magazine.
  67. On a semiautomatic rifle/carbine, the __________ is used to support the rifle with the support hand. It acts as a heat shield from the barrel.
  68. The __________ (shotgun only) is the part of the case mouth that bends inward to grip the bullet; with shotgun shells, the term applies to the closure at the case mouth.
  69. On a semiautomatic rifle/carbine, the __________ is the attachment on the barrel's forward end that reduces the flash as burning powder escapes when the bullet exits the barrel.
  70. An officer should make sure that a firearm
  71. A part of the shotgun's stock is the __________. This is the top corner of the butt.
  72. The __________ is a complete ammunition cartridge that contains all parts of ammunition. It is a military term that means one single cartridge.
  73. When operating a shotgun, __________ is the extractor's removal of the empty casing from the chamber and pushing the empty casing out of the weapon through the ejection port by manually cycling the slide/fore-end grip to the rear.
  74. On a revolver, the ___________ is the nose pin or firing pin-part of the hammer or frame that protrudes through the frame and strikes the primer (internal part).
  75. The __________ (on a revolver) is a star-shaped device attached to the extractor rod that fits inside the cylinder that the rounds rest on (internal part).
  76. When operating a shotgun, __________ is removing a round from the magazine tube and placing it in the barrel's chamber by cycling the weapon, or after placing a round in the open ejection port, pushing the slide forward.
  77. The __________ (on a semiautomatic pistol) provides a path for the fired bullet and is chambered to hold the cartridge.
  78. The __________ (on a revolver) is located on the end of the varrel near the muzzle. It is designed for the swift location of the target and for bringing the firearm into alignment for accuracy.
  79. environment
  80. On a semiautomatic rifle/carbine, the __________ is the housing for the magazine (internal).
  81. The __________ is the metal or plastic container that holds all parts of a round of ammunition: primer, powder charge, and bullet.
  82. A __________ functions by using the energy from the recoil of a single round of ammunition to extract and eject a fired cartridge from this firearm's chamber and load an unfired round from a magazine into the chamber for the next shot.
  83. The __________ is an internal structure that holds the parts of the revolver and provides a way of gripping the firearm.
  84. When handing a revolver to another person, the first step is to open the __________, with the barrel pointed in a safe direction.
  85. When operating a revolver, __________ is ignition of the primer and firing the cartridge.
  86. A(n) __________ is a cartridge design that features a solid lead bullet with a round nose. This bullet has a medium velocity. By design, it easily penetrates interior walls or hollow core doors and then ricochets.
  87. On a semiautomatic rifle/carbine, the __________ contains ammunition ready to be chambered.
  88. On a semiautomatic rifle/carbine, the __________ group contains the magazine release, magazine well, trigger housing, and trigger components.
  89. Which one of the following is NOT a safety rule to follow on the firing range?
  90. For Florida Statutes related to properly storing a firearm, the term "minor" means any person under the age of __________.
  91. The __________ (on a semiautomatic pistol) is a place for the thumb to rest while gripping the pistol.
  92. To perform a function check for a __________, you first press the trigger and hold it to the rear. Then, you cycle the slide with the support hand and slowly release the pressure of the trigger until the trigger resets. (You should hear a click and feel the reset on the trigger).
  93. Ammunition can be identified by
  94. The __________ (of a shotgun) is the only part not found in any other centerfire cartridge. It is used to seal/confine gases and can be made of plastic or compressed cardboard.
  95. The __________ (on a semiautomatic pistol) activates the pistol's operation.
  96. When operating a revolver, __________ is releasing the locked cylinder by squeezing the trigger so the cylinder can rotate and place a live round in front of the barrel in line with the firing pin; the cylinder then locks, allowing the firing pin to strike the live round that has been locked in place. The cylinder repeats this process with each pull of the trigger until all cartridges have been fired.
  97. The __________ (on a semiautomatic pistol) is the base of the magazine.
  98. On a shotgun, the __________ is the cylindrical steel part containing the firing pin and extractor, which closes the breech end of the barrel for firing.
  99. The __________ refers to markings found on the head of ammunition that indicate caliber or gauge and identify manufacturer.
  100. On a shotgun, the __________ is the long cylinder-shaped tube through which the projectile travels from the chamber.
  101. __________ is determined by measuring the diameter of the bore of a firearm. This helps identify the correct ammunition for a specific weapon.
  102. The __________ (on a semiautomatic pistol) allows access of the firing pin assembly.
  103. When operating a semiautomatic pistol, __________ is "pulling" the spent cartridge from the chamber.
  104. When studying firearms, the __________ hand is the dominant or strong hand that is used to fire a gun.
  105. The __________ (on a revolver) is the part of the hammer used for cocking the weapon to single-action mode.
  1. a heel
  2. b examining the caliber or gauge found on the cartridge's headstamp.
  3. c magazine
  4. d double action
  5. e locking
  6. f each time it is fired.
  7. g cylinder
  8. h feeding/chambering
  9. i Glock
  10. j firing
  11. k unlocking
  12. l top strap
  13. m round
  14. n forward assist
  15. o lead round nose
  16. p extractor rod
  17. q shooting
  18. r trigger
  19. s 16
  20. t safety
  21. u dictates what direction is safe (to point the muzzle of a firearm).
  22. v double action only
  23. w ejector
  24. x rim
  25. y 790.001
  26. z de-cocked
  27. aa magazine release
  28. ab trigger safety
  29. ac Gauge
  30. ad you do not intend to shoot.
  31. ae magazine catch
  32. af forestock/hand guard
  33. ag loading
  34. ah case/casings
  35. ai magazine floor plate
  36. aj rear sight
  37. ak grip
  38. al trigger guard
  39. am extractor
  40. an open the firearm's action and physically and visually inspect it to make sure that it is not loaded.
  41. ao action/slide release
  42. ap revolver
  43. aq slide cover plate
  44. ar hammer
  45. as is unloaded and is pointed in a safe direction before cleaning or handling it.
  46. at week
  47. au shot
  48. av while they are off duty.
  49. aw bullet
  50. ax receiver
  51. ay primer
  52. az double action/single action
  53. ba muzzle barrel
  54. bb is the most common cause of firearm accidents.
  55. bc is
  56. bd cocking
  57. be Caliber
  58. bf ejection port
  59. bg jacketed soft point
  60. bh wad(s)
  61. bi Always unholster a firearm behind the firing line.

    Always anticipate any commands from the range instructor.
  62. bj follower
    magazine tube
    magazine insert
    floor plate
  63. bk it were loaded, whether you think it is or not.
  64. bl muzzle flash suppressor
  65. bm single-action
  66. bn support
  67. bo blank round
  68. bp extraction
  69. bq powder
  70. br safety check his or her firearm each time it is used.
  71. bs chambering
  72. bt second-degree misdemeanor
  73. bu hand
  74. bv recoil pad
  75. bw barrel
  76. bx in a .38 caliber revolver.
  77. by semiautomatic pistol
  78. bz extraction/ejecting
  79. ca ejecting
  80. cb in a .357 revolver.
  81. cc bolt
  82. cd port arms
  83. ce Be courteous to fellow shooters.

    When not training, watch other shooters and listen to the range instructor.

    Learn the location of the first aid kit on the range.

    If a weapon fails to fire, keep it pointed in a safe direction and immediately attempt to clear the malfunction.

    Immediately report all injuries to an academy staff member.

    Never eat on the firing line.
  84. cf extracting/ejecting
  85. cg double/single
  86. ch never
  87. ci lower receiver
  88. cj butt
  89. ck the firearm owner will not be charged with a second-degree misdemeanor.
  90. cl toe
  91. cm slide lock
  92. cn comb
  93. co magazine well
  94. cp frame
  95. cq floor/butt plate
  96. cr hammer spur
  97. cs slide stop lever
  98. ct headstamp
  99. cu unlocking/feeding/locking
  100. cv remains
  101. cw thumb rest
  102. cx loaded firearm unattended.
  103. cy crimp
  104. cz front sight
  105. da slide