Question types

Start with

Question limit

of 52 available terms

Print test

52 Matching questions

  1. Cycle Stock (aka base stock)
  2. Product/Market Classification
  3. Quick Response (QR)
  4. Determining How Much to Order
  5. Planning safety stock requires three steps:
  6. MRP and DRP
  7. Total cost
  8. Approaches to implementing inventory management policies:
  9. The primary functions of inventory are:
  10. An ABC System classifies inventory based the degree of importance:
  11. EOQ Model Assumptions
  12. Periodic review =
  13. Requirements Planning
  14. Policies and Parameters
  15. Who are your key customers/stakeholders?
  16. Inventory Carrying Cost Policy
  17. Safety Stock with Combined Uncertainty
  18. Fair Share Allocation
  19. Formula for Calculating Safety Stock
  20. Inventory Ordering Cost Components
  21. EOQ ='s
  22. Maintenance, Repair, and Operations (MRO)
  23. B & C items
  24. Inventory control defines how often inventory levels are reviewed to determine when and how much to order
  25. Calculating Safety Stock
  26. Inventory Carrying Cost Components
  27. Obsolete Inventory
  28. Determined / Calculated Demand
  29. Service Level is
  30. Dependent Demand
  31. Anticipation (Speculative) / Strategic Inventory
  32. Inventory Definitions
  33. Pipeline Inventory
  34. Perpetual review =
  35. Common Metrics for Inventory:
  36. Profile Replenishment (PR)
  37. Vendor Managed Inventory (VMI)
  38. Every unit/dollar of inventory that you can reduce
  39. Safety Stock
  40. Collaborative Inventory Replenishment Programs
  41. Three approaches to introduce safety stock into dependent demand situations if necessary
  42. A items are
  43. Other Important Inventory Related Definitions
  44. Dependent Demand Replenishment
  45. What are the 2 types of uncertainty we are trying to account for with safety stock?
  46. Vendor Managed Inventory detail (VMI)
  47. Segment Strategy definition
  48. Independent Demand
  49. When is safety stock needed
  50. Typical Adjustments to EOQ
  51. Common measures of service level include:
  52. Assumptions of Reactive (Pull) Inventory Logic
  1. a Manufacturers (internal/external), Wholesalers, Distributors, Retailers, Consumers
    Level of service required (does it differ by customer)
    What is important to them?
    What value do they create?
    What risks do they take?
  2. b Safety stock is only needed for under-forecast (demand exceeds forecast) error!
  3. c 1. Determine the likelihood of stockout using a probability distribution, i.e., forecast accuracy/error
    2. Estimate demand during a stockout period
    3. Decide on a policy concerning the desired level of stockout protection, i.e., desired Service Level
  4. d Steps:
    1.) Determine annual usage or sales for each item.
    2.) Determine % of total usage or sales that each item represents.
    3.) Rank items from highest to lowest %.
    4.) Classify items into groups:
    A: Highest Value
    B: Moderate Value
    C: Least Valuable
  5. e All customers, market areas, and products contribute equally to profits

    Infinite capacity exists at the production facility

    Infinite inventory availability at the supply location

    Supply cycle time can be predicted and cycle lengths are independent

    Customer demand patterns are relatively stable and consistent

    Each distribution warehouse's timing and quantity of replenishment orders are determined independently of all other sites, including the supply source

    Supply cycle length cannot be correlated with demand
  6. f -Volume Transportation Rates offer a freight-rate discount for larger shipments
    -Quantity discounts offer a lower per unit cost when larger quantities are purchased

    -Ordering in full production lot sizes (due to vendor requirement, quality, etc.)
    -Multiple-item purchase (may generate a volume discount or other benefit)
    -Limited capital - may not be able to afford to buy the EOQ quantity at one time
    -Dedicated trucking (due to security reasons, cross contamination concerns, etc.)
  7. g \ is inventory to satisfy actual or projected demand in the next immediate time
  8. h -Cost of capital - specified by senior management
    -Taxes - on inventory held in warehouses
    -Insurance - based on estimated risk or loss over time and facility characteristics
    -Obsolescence - deterioration of product during storage, and shelf-life
    e.g., food and pharmaceutical sell-by dates
    -Storage - facility expense related to product holding rather than product handling

    is the expense associated with maintaining inventory

    Annual inventory carrying cost percent times average inventory value
  9. i Ordering Costs - are incurred each time an order is placed
    Order preparation costs
    Order transportation costs
    Order receipt processing costs
    Material handling costs
  10. j is stock that is expired/out-of-date or no longer needed.
  11. k represents the inventory being held by third parties outside the firm in the "downstream" external supply channel.
  12. l is to hedge a currency exchange, take advantage of a discount, protect against a major short-term disruptive event in supply, take advantage of a major business opportunity for sales, provide for life cycle changes; seasonal, launch, bridging, etc.
  13. m Planning for both demand and supply uncertainty requires combining two independent variables

    The joint impact of the probability of both demand and supply variation must be determined

    Direct method is to combine standard deviations using a convolution formula
    -The calculations are beyond the scope of this course
    but you should understand that the concept exists and
    there is a method for addressing this situation.
  14. n Inventory carrying cost is an imputed cost. It doesn't appear in the financial statement. Companies determine the cost of capital they want to use which is typically the return they expect on investments.

    Final carrying cost percent used by a firm is a managerial policy
  15. o - The demand for the final product. Has a demand pattern affected by trends, seasonal patterns, & general market conditions.
    Forecasted Demand
    Example: Pick-up Truck
  16. p specifies all aspects of inventory management process for each segment of inventory
    e.g., service objectives, forecasting method, management technique, and review cycle
  17. q given the highest priority. "80/20 rule" Generally, A items account for approximately 20% of the total number of items, but about 80% of the total inventory cost.
  18. r is inventory held for the purpose of buffering against variations or uncertainty in demand or supply.
  19. s provides each distribution facility with an equitable distribution of available inventory

    Limited ability to manage multistage inventories

    DS=AQ+Sum Inventory for each whse /sum of daily demand for each whose
    Amount allocated = (DS * D) - I

    DS = Common days supply for warehouse inventories
    AQ = Inventory units to be allocated from plant warehouse = 500
    Ij = Inventory in units for warehouse J
    Dj = Daily demand for warehouse J
  20. t Inventory Control is the managerial procedure for implementing an inventory policy
    Demand Uncertainty involves the variation in sales during the lead time necessary to replenish inventory
    Supply (or performance cycle) Uncertainty involves variation in the time and/or quantity necessary to replenish inventory.
    Time Buckets are discrete increments of time used to facilitate planning activities
    Reorder Point defines when a replenishment order is initiated.
    Carrying Cost is the expense associated with maintaining inventory.
    Safety Time is ordering an item earlier than necessary based on the lead time, to assure timely arrival.
    Fill Rate represents the magnitude of a backorder or stockout. Can be case fill rate, line fill rate, etc.
  21. u VMI arrangements transfer the responsible for managing the inventory located at a customer's facility back to the vendor/manufacturer of that inventory.

    The vendor/manufacturer:
    -Stocks inventory
    -Places replenishment orders
    -Arranges the display
    -Typically owns inventory until purchased
    -Is required to work closely with customer
  22. v 1.) Put safety time into the requirements plan
    2.)Increase the replenishment order by a quantity specified by some estimate of expected plan error, i.e., over-planning / top-level demand
    3.) set safety stocks directly for a component rather than to the item of top-level demand
  23. w Buffering against uncertainty in the marketplace
    Decoupling dependencies in the supply chain
    Balancing demand and supply
    Geography (Where used)
  24. x Where the sum of the annual ordering costs and the annual inventory holding costs is minimized

    SQRT of (2XCost per orderXAnnual sales volume/Inventory carry cost*Cost p/unit)
  25. y Order quantities computed with Material Requirements Planning (MRP).
    Relationship between independent and dependent demand shown in Bill of Materials (BOM).
    Subassemblies, components, & raw materials are examples of dependent demand items.
    Example: Pick-up Truck Engine
  26. z Performance Cycle - the elapsed time between release of a purchase order by the buyer to the receipt of shipment
    Case Fill Rate - the percent of cases ordered that are shipped as requested
    Line Fill Rate - the percent of order lines (items) that were filled completely as requested
    Order Fill - the percent of customer orders filled completely as requested
  27. aa are items that are needed by the firm to operate the business and/or produce products but do not end up as part of the final product.
  28. ab drops right to the bottom line as pure savings
  29. ac ROP = D(T + P/2) + SS
    D=Average daily demand
    T = Average performance cycle length
    P = reveiw period in days
    SS = safety stock

  30. ad Anticipatory / Planning (or push) Approach proactively allocates inventory on the basis of forecasted demand and product availability

    Responsive / Reactive (or pull) Approach responds to actual customer demand to pull the product through the distribution channel

    Hybrid approach uses a combination of push and pull
  31. ae Periodic Review monitors inventory status of an item at regular intervals such as weekly or monthly

    Perpetual Review continuously monitors inventory levels to determine inventory replenishment needs
  32. af must be defined at a detailed level
    e.g., data requirements, software applications, performance objectives, and decision guidelines
  33. ag K X sqrt(Lead time X dc) X 1.25 MAD
    K= Customer service level
    Lead time = time to replenish goods
    DC=Number of distribution centers where there's safety stock
    MAD = Mean absolute deviation of the monthly demand(past 12 months)
  34. ah All demand is satisfied. Stock-outs are not allowed.
    Rate of demand is continuous, constant and known
    Replenishment lead time is constant and known
    Unit price of product is constant and independent of order quantity or time
    Holding/Carrying cost is known and constant.
    Ordering cost is known and constant
    An infinite planning horizon exists
    No interaction between multiple items of inventory
    No in transit inventory time
    No limit is placed on capital availability
  35. ai are designed to streamline the flow of goods within the supply chain

    Intent is to reduce reliance on forecasting and position inventory using actual demand on a just-in-time basis
  36. aj is a technology-driven cooperative effort between retailers and suppliers to improve inventory velocity while matching supply to consumer buying patterns
  37. ak account for the other 80% of the total number of items, but only 20% of total inventory cost.

    B items require closer management since they are relatively more expensive (per unit), require more effort to purchase / make, & may be more prone to obsolescence.

    C items have the lowest value, and hence the lowest priority
  38. al Customer Service Level - measured as "fill rate"
    Units - the number of units available
    Dollars - the amount of dollars tied up in inventory
    Weeks of Supply - (avg. on-hand inventory) / (avg. weekly usage)
    Inventory Turns - (cost of good sold) / (avg. inventory value)
    Inventory Carrying Cost - (discussed with EOQ)
  39. am integrates across the supply chain taking into consideration unique requirements

    Materials Requirements Planning (MRP) is driven by a production schedule
    Distribution Requirements Planning (DRP) is driven by supply chain demand
  40. an D X T + SS
    D=Average daily demand
    T = Average performance cycle length
    SS = safety stock
  41. ao Dependent demand inventory requirements are a function of known events that are not random

    Dependent demand does not require forecasting because there is no uncertainty

    Generally, no specific safety stock is needed to support time-phased procurement programs (e.g., MRP)

    No safety stock assumes
    -Procurement replenishment is predictable and constant
    -Vendors and suppliers maintain adequate inventories to satisfy 100% of purchase requirements
  42. ap groups products, markets, or customers with similar characteristics to facilitate inventory management
    e.g., classify by sales, profit contribution, inventory value, usage rate or item category
  43. aq Economic Order Quantity - A quantitative decision model based on the trade-off between the annual ordering costs and the annual inventory holding costs
  44. ar is a modified QR that eliminates the need for replenishment orders
  45. as Service level is equal to 100% minus probability % of stockout
    e.g., a service level of 99% results in a stockout probability of 1%

    The most common probability distribution for demand is the normal distribution, i.e., "bell curve"

    From analysis of historical demand data the safety stock required to ensure a stockout only 1% of the time is possible

    A one-tailed normal distribution is used because only demand that is greater than the forecast can create a stockout.

    Is the forecast error bias on the over-forecast or under-forecast side of the
  46. at MRP systems reports information to the DRP system utilizing an integrated approach.
  47. au extends QR and VMI by giving suppliers the right to anticipate future requirements according to their knowledge of a product category (JIT II)
  48. av Total Cost = Purchase Cost + Ordering Cost + Holding Cost

    Total cost is driven by inventory planning decisions which establish when and how much to order
  49. aw - Describes the internal demand for parts based on the demand of the final product in which the parts are used.
  50. ax a performance target specified by management and defines inventory performance objectives
    Generally, the higher the service level target, the higher the amount of inventory you will need to assure the target is achieved.
    e.g. 90% of orders filled complete in 3 order cycle days
  51. ay 1.)Demand Uncertainty — when and how much product will our customers order?
    2.)Supply (Performance Cycle) Uncertainty — how long will it take to replenish inventory with our customers?

    Variations must be considered in both areas to make effective inventory planning decisions
  52. az raw materials, work-in-process, finished goods, and maintenance, repair, and operations (MRO) (Stocked internally)